like this, or this
What you will need:
Some Ceramic tile (you can get it at Home Depot)
Acrylic paints, or paint pens, or both
Gloss Varnish, like Duraclear, etc. (You can find it with the paints), you could also use the spray on type, but that has to be done outside and is horrible to breathe in, it also doesn’t leave as nice, thick, and glossy a protective coating
Paintbrushes, at least one fairly large one, like the green one in the pic. (if you are going to be using just paint pens, you will just need the large one)
A Glue Gun, and some glue sticks for the glue gun
*Optional: some sandpaper
*Optional, Step 1:get rid of the ridges on the sides of the tiles if you want, be careful to make it even, after you do this, you must put a sealant on the part that was sanded and let that dry.
Step 2: Draw out the outline of whatever image you want on the tile with the pencil, you will have to go over the lines well, and be careful as it smudges easily. If you have no drawing skills, you can print out an image and cut out the lines with an x-acto knife, then trace that on.
Step 3: Paint the first layer of paint carefully, although you can dampen a paper towel, cover the point of the pencil with it and use that to carefully wipe away any mistakes. Let that dry, then keep adding on layers of paint until you are satisfied with it.
Step 4: While waiting for the paint to dry, cut a square (or whatever shape your tile is) slightly larger than the tile (about a cm on all sides) out of the felt.
Step 5: Once the final layer of paint has dried completely, carefully, and VERY GENTLY, apply a semi-thick layer of the gloss varnish onto the tile (make sure you get the sides too!) Using the larger brush (do NOT use one that does not have fine, thin, soft bristles! Or else it will scrape away the paint) Also make sure that the hairs on the brush are not loose and do not come out onto the tile, as they will stick. Also do not use sponges or rollers, these will wipe/scrape the paint away/ damage the acrylic painting). Once the first coat is completely dry, apply another layer. All in all, apply about 3-5 layers of the gloss varnish.
Step 6: Heat up the glue gun, make sure it does not fall over and is not on anything flammable, I suggest using an old metal pan or a ceramic plate that you don’t mind using to Stand the gun on. For those of you who haven’t used a glue gun before, you should have a glue stick in the gun as it is heating up.
Step 7: Carefully apply the felt to the bottom of the tile with THIN lines of glue from the glue gun. Make sure to put glue in the middle too! Also make sure you have glued as close to the edges as possible.
Step 8: After the felt is applied, take your x-acto knife, or scissors if you do not have one, and CAREFULLY cut away the excess felt from the edges, making sure not to scrape them.
Et Voila, you have a cool, one of a kind coaster, or piece of artwork!
If you put this tutorial on your own blog PLEASE make sure to link it back to this one!
Tutorial Copyright abitofthisbitofthat wordpress blog owner/author 2013